Product will be ordered from supplier. If the supplier is unable to deliver by the specified date, we will inform you by e-mail
 Available | Supplier Warehouse |
 Not available | Lemona Estonia warehouse |
| Not available | Lemona Vilnius warehouse 1 |
| Not available | Lemona Vilnius warehouse 2 |
| Not available | Lemona Kaunas warehouse |
| Not available | Lemona Klaipėda warehouse |
| Not available | Lemona Šiauliai warehouse |
| Not available | Lemona central warehouse |
Over €50.00 (Orders up to 1000 kgs) | For free |
To €50.00 (Orders up to 1000 kgs) | €5.00 |
The push button coupler is a module with 4 contact inputs for regular push buttons and switches. It communicates and it is powered from the DALI channel.
Its small size allows it to be installed behind standard wall switches and push buttons.
There are 4 digital inputs (dry contact) designed for conventional push buttons or switches. These inputs facilitate seamless integration with momentary contact push button or switch controls.
Support DALI-2 multi-master.
Powered directly from the DALI channel. This ensures efficient integration and operation without the need for additional power sources.
Can be configured via DALI-2 application controllers.
Designed for optimal mounting behind standard switches.
Built-in wires for connecting to push buttons and switches.
Via the DALION lighting controller, the connected push
buttons and switches can control luminaries on the DALI
channel. The DALION allows for the following
commands and more:
✓ Off, On
✓ Dim Up and Down
✓ Direct Value
✓ Recall Scenes 1-16
✓ Last On Level
✓ Occupancy
✓ Daylight Harvesting
✓ Demand Response
The bus wiring must be connected in a star topology, a linear topology, or a mixture of the two. Wiring must not be carried out in a ring structure. The two wires that serve as the bus must be located in the same cable or cable conduit. In the cable or cable conduit, the two wires must be side by side to avoid unintentional coupling to other signals.
| Model | DALION-PBCD-4 |
|---|---|
| Power supply | Powered from the DALI channel, current: 6 mA. |
| Input | 4 digital inputs (dry contact) |
| Dimension | 45 x 20 x 10 mm, 1.80″ x 0.80″ x 0.42″ (L x W x H) |
| Fixation | Wires and can be installed behind standard wall switches and push buttons. |
| Wiring | 0.2 – 0.5 mm², Stripping length: 6 mm |
| Enclosure material | UL 94 V-0 |
| Operating temperature | 0 °C to 45 °C (32 °F to 113 °F) |
| Standards | Input devices – Push buttons – 301 – IEC 62386-301 |
| Model Number | Model Description |
|---|---|
| DALION-PBCD-4 | DALI Push Button Coupler |
