7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7466x11.0, Wera
Toote kood: 05074722001
Kättetoimetamise tähtajad
2024-07-05 Kui tellite praegu on eeldatav kohaletoimetamise kuupäev
Kaup tellitakse tarnija laost. Kui tarnijal ei ole võimalik tarnida kaupa näidatud kuupäevani, informeerime teid epostitsi.
 Saadaval | Tarnija ladu |
Kulleriga koju
Kulleriga koju
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 4,50 € |
Kohaletoimetamine DPD pakiautomaatidele
Kohaletoimetamine DPD pakiautomaatidele
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.
3,50 €
Tarnija toote kirjeldus
Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.
Please note: 1 Ncm = 0.01 Nm.
Application:Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4
Design:Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology
Pre-set torque:2.5 in.lbs., 11.0 in.l
Factory pre-set torque screwdriver with Rapidaptor quick-release chuck
Only adjustable with an extra tool
Suitable for bits with 1/4" hex head drive
Distinct signal when pre-set value is reached
Please note: 1 Ncm = 0.01 Nm.
Application:Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4
Design:Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology
Pre-set torque:2.5 in.lbs., 11.0 in.l
Factory pre-set torque screwdriver with Rapidaptor quick-release chuck
Only adjustable with an extra tool
Suitable for bits with 1/4" hex head drive
Distinct signal when pre-set value is reached
Tarnija toote parameetrid
NomNr
05074722001
Brand
Wera
Supplier's product code
05074722001
Product ID
U-2631005
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].
