Industrial I/O module with Modbus RTU/ASCII communication - 8 Triac Outputs (500 mA @ 24 V AC, 500 mA @ 230 V AC). Power supply 10-38 V DC; 10-28 V AC

Toote kood: SFAR-S-8TO

Industrial I/O module with Modbus RTU/ASCII communication - 8 Triac Outputs (500 mA @ 24 V AC, 500 mA @ 230 V AC). Power supply 10-38 V DC; 10-28 V AC

Toote kood: SFAR-S-8TO

Kaal	0.172 kg.
Bränd	iSMA CONTROLLI

Hinnapiirid

Kogus	Hind KM-ga (tk)
1+	€262.18
B2B

Kaup on teel lattu. Kui tellite praegu, saadame siis kui kaup saabub lattu.

Kättetoimetamise tähtajad

Kontorist kättesaamine

Kontorist kättesaamine Tasuta

Tellimusi töödeldakse ja täidetakse tööpäevadel kell 8.30–17.00.
Kui teie tellimus on kogumiseks valmis, teavitame teid sellest SMS-i ja e-posti teel.

Kogus laos

Ei ole saadaval	Keskladu
Ei ole saadaval	Tallinna kontor

Kulleriga koju (1-4 tööpäeva, kui toode on laos olemas)

Üle 25,00 €

(Tellimused kuni 1000 kgs)

Tasuta

25,00 €-le

(Tellimused kuni 1000 kgs)

4,50 €

Kohaletoimetamine DPD pakiautomaatidele (1-4 tööpäeva, kui toode on laos olemas)

Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.

3,50 €

Kauba kirjeldus

Kaal	0.172 kg.
Bränd	iSMA CONTROLLI

SfAR-S-8TO can be used as a digital output and as an analog PWM output module. It gives users a possibility to control, for example, PWM-controlled valves.

The module has 8x triac outputs (TO). All outputs are isolated from the logic with opto-isolators.

A built-in RS485 interface allows easy connection over Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.

The module is equipped with a set of LEDs used to indicate the status of I/O, power supply, and RS485 communication.

Configuration of the modules is carried out with our free software, the SfAR Configurator. A built-in mini USB allows performing a primary configuration of the unit without an additional power supply.

To simplify installation, the modules have been equipped with the Quick Connector system. Using a dedicated SFAR-S-LINK cable allows connection of up to 10 modules, which provide both RS485 communication and external power supply.