Joy-iT KY032 Infrared proximity sensor
Tootekood: SEN-KY032IR
Foto on illustratiivne. Toote täpseid tehnilisi parameetreid vaadake kirjeldusest.
Kättetoimetamise tähtajad
2025-06-04 Kui tellite praegu on eeldatav kohaletoimetamise kuupäev
Kaup tellitakse tarnija laost. Kui tarnijal ei ole võimalik tarnida kaupa näidatud kuupäevani, informeerime teid epostitsi.
 Saadaval | Tarnija ladu |
Kulleriga koju
Kulleriga koju
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.Tellimused üle 25,00 € toimetatakse kohale tasuta.
25,00 €-le (Tellimused kuni 1000 kgs) | Tasuta |
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
Kohaletoimetamine DPD pakiautomaatidele
Kohaletoimetamine DPD pakiautomaatidele
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.Tellimused üle 25,00 € toimetatakse kohale tasuta.
Tasuta
Kauba kirjeldus
Joy-iT KY032 Infrared proximity sensor
Kasulik informatsioon
Tehnilised andmed
Tarnija toote kirjeldus
The KY032IR sensor is an infrared proximity sensor.
It detects an obstacle with the help of the transmitter (infrared light) and receiver (photodiode) by reflection of the surface.
The determined value 0/1 ( true/false ) is sent as a digital signal to the microcontroller.
With the help of the potentiometers the strength of the transmitter and the sensitivity of the receiver can be adjusted.
The distance for triggering the sensor can be adjusted by the settings made.
Additionally the sensor has a PIN "Enable" and a jumper "EN".
The jumper is plugged in as standard, which means that permanent obstacle detection is executed.
To deactivate permanent obstacle detection, the jumper must be removed and the PIN "Enable" for the control signal connected.
The sensor is suitable for controlling autonomous robots.
It detects an obstacle with the help of the transmitter (infrared light) and receiver (photodiode) by reflection of the surface.
The determined value 0/1 ( true/false ) is sent as a digital signal to the microcontroller.
With the help of the potentiometers the strength of the transmitter and the sensitivity of the receiver can be adjusted.
The distance for triggering the sensor can be adjusted by the settings made.
Additionally the sensor has a PIN "Enable" and a jumper "EN".
The jumper is plugged in as standard, which means that permanent obstacle detection is executed.
To deactivate permanent obstacle detection, the jumper must be removed and the PIN "Enable" for the control signal connected.
The sensor is suitable for controlling autonomous robots.
Technical data:
Model: Obstacle sensor
Function: detects obstacles by means of infrared (0/1 signal output when exceeding the limited value)
Detection distance: 2 - 20 cm
Special feature: Can be switched on and off via a controller using a separate pin (Enable-Pin)
Supply voltage: 3 - 5 V
Current consumption: at 3 V: approx.10 mA at 5 V. approx. 6 mA
Detection angle: 35 °
Operating temperature: -10 - 50 °C
Kasulik informatsioon
Tarnija toote parameetrid
Product code
SEN-KY032IR
Brand
Joy-iT
Supplier's product code
SEN-KY032IR
Product ID
U-2315012
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].