LED Headlights X4-series AVIATOR H3 6500K max 44W AMIO-03762, AMiO

AMiO X4 AVIATOR LED bulbs perfectly matched 1 to 1.

Size is the same as the standard bulb. H3 bulb replacement

Perfectly matched model - forget about installation problems, modifications, unsealed steaming headlights, casing trimming and adapters.

The construction uses materials such as aluminum and copper, provides exceptional life and effective heat dissipation

Optimal geometry and placement of diodes to set the required cut-off line and maximum brightness.

Great design, allowing installation wherever classic LED retrofits with heat sink do not fit. Ideal for lenticular and traditional headlights. No IR and UV emissions - they do not burn the reflectors

Parameters:

• CANBUS built-in decoder in 95% of cars does not cause the error of burnt out bulb
• Color of light Xenon White 6500K
• Power 44W complete
• Bulb cooling is based on an electronic fan and a copper core.
• Size identical to that of a traditional tungsten bulb
• Voltage 12V
• Life of the diodes is 50000h
• Light source CHIP LED 7330 diodes
• Light intensity of the bulb set 3936LM
• Bulbs do not interfere with FM/CB radio reception  
• Location of the LEDs exactly in the same place as the filament in a traditional incandescent bulb - parameters such as geometry and light cut-off line remain unchanged.

The light output of the set is several times more powerful than a traditional halogen set.

The bulbs have CHIP LED 7330, which provide a very bright light output, making them unrivaled by traditional tungsten bulbs or xenon filaments. Their precise placement does not blind drivers coming from the opposite direction.

The bulbs have no polarization. This means that they shine in any position, regardless of the +/- arrangement in the car.

Despite the advanced technology, installation is trivially simple - you install it in place of the old bulb.

To ensure long trouble-free operation, the manufacturer has installed a copper core, which is great for collecting heat, and just behind it has placed a fan, which cools the core in question.

LED retrofits, due to their different current-voltage characteristics, can cause the so-called burnt bulb error to be displayed in some car models. The Canbus system has coverage for 95% of vehicles and, unfortunately, does not always work perfectly. If your vehicle is equipped with rigorous lighting change control, we recommend fitting additional Canbus resistors or purchasing full Canbus series bulbs.