EcoFlow RAPID Powerbank 25000mAh, 170W (built-in 100W cables)., EcoFlow

EcoFlow RAPID Powerbank 25000mAh, 170W (built-in 100W cables)

The EcoFlow RAPID will keep you supplied with power while traveling, at work, at university, etc. With charging support of up to 170W and built-in 100W USB-C (Universal Serial Bus, a universal connector for data and power) cables, it provides convenience of use and fast charging of compatible devices. Despite its capacious battery, it retains a compact size (157 × 53.8 × 48.8 mm) and a weight of only about 580 g. The rugged chassis and X-Core 3.0 technology (X-Core, EcoFlow's proprietary power management chip) offer reliability, safety at your fingertips.

Up to 170 watts of power

EcoFlow RAPID allows you to charge multiple devices at once - it can deliver up to 170 watts of total output power through one USB-C port and two built-in cables. So even your laptop, tablet, smartphone and headphones can charge at full power simultaneously.

Instant charging - 50% in just 26 minutes

The RAPID is also one of the fastest charges available for powerbanks of this capacity. With a 100W USB-C input, you can charge it to 50% in 26 minutes. The total charge (25,000 mAh) is 80 minutes at 100 W or 53 minutes to 80% at the same power.

Built-in cables - forget about extra cords

RAPID offers 2 built-in 100 W USB-C cables: one 67 cm long and the other 26 cm long. Whatever the circumstances, you always have a cable at hand. Both have passed durability tests and have a maximum load of 20 kg, so you can be sure that the EcoFlow RAPID will never let you down.

Saving capacity in a compact form

As much as 90 Wh of energy - in line with air travel limits - fit in the handy case. That's enough to charge a MacBook Pro twice, an iPhone 16 4-5 times, or a Steam Deck nearly twice - meaning stress-free work on the road or in the open air.

Safety at the highest level

Thanks to EcoFlow's X-Guard technology (X-Guard, EcoFlow's thermal and overload protection system), the BMS (Battery Management System) provides four layers of protection against overcharging, over-discharge, overheating and short-circuit - all parameters are monitored in real time. X-Core 3.0 precisely regulates performance and temperature, protecting the powerbank and connected devices from damage.

Clear screen and full control through the app

The powerbank is equipped with an easy-to-read TFT (Thin-Film Transistor, thin-film display) screen, from which you can check the battery level, port power, temperature, cell status, number of cycles and even charge emoji in real time. With the EcoFlow app, you can control the battery optimization mode, select graphics on the standby screen or set alerts.