Hi-Level Adapter with remote

• allows you to connect an external amplifier to head units that do not have RCA
• Continuously variable output signal separately for the left and right channels
• output REMOTE TURN ON / OFF - to switch on and off the external amplifier
• head units designed for a maximum power output up to 2x50W    
• 2 RCA (left and right channel)

CONNECTIONS DIAGRAM

• "L OUTPUT R” - RCA output for the left channel (L) and right ( R) RCA inputs connected
   to the amplifier

 •  REMOTE " (power and output remote to wake and power off amplifier
    ( GROUND ) - black wire - ground power supply ( 12V )
    - Connect the power supply to ground.
    ( 12V) - yellow wire - power supply (+ 12V) - Connect eg . power wire of head unit
    or amplifier   
    ( REMOTE OUT ) - blue wire - Remote output (+ 12V) to turn on / off the amplifier
     - connect to the Remote input of the amplifier

  • "INPUT"  ( input - Speakers )
     white wire (L +) - connected to the speaker output of the head unit
     left channel positive polarity ( + )
     black and white wire ( L ) - connected to the speaker output of the radio channel left the
     negative pole ( - )
     black wire (ground ) - ground - connect to ground to minimize interference
     gray wire (R +) - connected to the speaker output of the radio for the right channel of
     positive polarity ( + )
     gray and black ( R-) - connected to the speaker output of the radio for the right channel of
     the negative polarity (-)

 INSTALLATION

              Set the potentiometers to min.

             Connect the wires according to the wiring diagram

             Turn on the radio to provide the external signals

             Adjust the potentiometers.