Сроки доставки
Забрать в офисе LEMONA electronics Бесплатно
Количество в магазине
4 шт. | Центральный склад |
Недоступно | Таллиннский филиал |
Доставка на дом (1-5 рабочих дня, если товар есть на складе)
После передачи товара курьеру мы сообщим вам об этом по электронной почте.
Более 25,00 € (Заказы до 1000 кг) | Бесплатно |
К 25,00 € (Заказы до 1000 кг) | 4,50 € |
Получение в почтомате (1-5 рабочих дня, если товар есть на складе)
3,50 €
Описание товара
OKS 1110 – Multi-Silicone Grease
Highly adhesive transparent silicone grease for fittings, seals and plastic parts.
Areas of application
• Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
• Lubrication of O-rings and rubber seals for assembly and during operation
• Lubrication of plastic parts
Advantages and benefits
• NSF H1 registered
• Tasteless and odourless
• Highly effective due to excellent adhesion on all materials
• Neutral behaviour with regard to plastics and elastomers
• Completely EPDM-compatible
• High long-term stability without drying out, hardening or bleeding
• Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
• MOSH/MOAH-free
Technical specifications
• Operating temperature: -40 °C → +200 °C
• NLGI grade: 3
• Base oil viscosity (40 °C): 9,500 mm²/s
Applications
Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.