Wall panel 2,6" LCD display,built in temperature and CO2 sensors, 24 V AC/DC, Modbus RTU/ASCII or BACnet MSTP
Wall panel 2,6" LCD display,built in temperature and CO2 sensors, 24 V AC/DC, Modbus RTU/ASCII or BACnet MSTP
Kaal | 0.207 kg. |
Bränd | iSMA CONTROLLI |
Kättetoimetamise tähtajad
Kontorist kättesaamine Tasuta
Kui teie tellimus on kogumiseks valmis, teavitame teid sellest SMS-i ja e-posti teel.
Kogus laos
Ei ole saadaval | Keskladu |
Ei ole saadaval | Tallinna kontor |
Kulleriga koju
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 4,50 € |
Kohaletoimetamine DPD pakiautomaatidele
3,50 €
Kauba kirjeldus
Kaal | 0.207 kg. |
Bränd | iSMA CONTROLLI |
iSMA-B-LP is a room unit with 2.3” LCD display and four function buttons. Additionally, the room unit has a built-in temperature, humidity (option) and CO2 (option) sensors.
There are four different built-in sensors combination available, depending on hardware version:
• iSMA-B-LP. Temperature sensor only.
• iSMA-B-LP-H. Temperature + Humidity sensors.
• iSMA-B-LP-C. Temperature + CO2 sensors.
• iSMA-B-LP-HC. Temperature + Humidity + CO2 sensors.
iSMA-B-LP is powered with 24 V AC/DC and has the built-in RS485 port (Modbus RTU/ASCII and BACnet MSTP). Use of open communication protocol allows to connect the room unit with any controller supporting Modbus RTU/ASCII or BACnet MSTP. Together with iSMA-B-FCU controller, the room unit allows to change the basic parameters such as: temperature setpoint, fan speed, FCU mode and others.
Thanks to the built-in USB port, there is possibility to firmware update and room unit configuration without the necessity of power supply. iSMA-B-LP has the modern design and is available in different colours (white is basic) on client request.
Kasulik informatsioon
Tehnilised andmed
Laokood | 327969 |
Kaal | 0.207 kg. |
Bränd | iSMA CONTROLLI |
NomNr | iSMA-B-LP-C |