Kättetoimetamise tähtajad
2026-05-19 Kui tellite praegu on eeldatav kohaletoimetamise kuupäev
Kaup tellitakse tarnija laost. Kui tarnijal ei ole võimalik tarnida kaupa näidatud kuupäevani, informeerime teid epostitsi.
 Saadaval | Tarnija ladu |
Kulleriga koju
Kulleriga koju
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.Tellimused üle 50,00 € toimetatakse kohale tasuta.
Üle 50,00 € (Tellimused kuni 1000 kgs) | Tasuta |
50,00 €-le (Tellimused kuni 1000 kgs) | 5,00 € |
Kohaletoimetamine DPD pakiautomaatidele
Kohaletoimetamine DPD pakiautomaatidele
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.Tellimused üle 50,00 € toimetatakse kohale tasuta.
3,50 €
Kauba kirjeldus
Router Teltonika LTE RUTC50
Tehnilised andmed
Tarnija toote kirjeldus
- Type: router
- Brand: Teltonika
- Model: RUTC50
- 5G Sub‑6 GHz (SA/NSA), up to 2.4/3.4 Gbps DL, 4×4 MIMO
- 4G LTE Cat19
- Ports: 1 × WAN, 4 × LAN 10/100/1000 Mbps
- Mesh support (802.11s)
- USB: USB 2.0
- SMS, I/O support
- Dual SIM
- GNSS
- Power: 9–50 VDC, Passive PoE on LAN1
- Operating temperature: -40…+75 °C
- Industrial
- General
- Mobile module5G Sub-6 Ghz SA/NSA 2.4/3.4 Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2); 4G LTE Cat 19 1.6 Gbps DL, Cat 18 200 Mbps UL; 3G 42 Mbps DL, 5.76 Mbps UL
- eSIMConsumer type eSIM, up to 7 profiles, does not include data plans
- 3GPP ReleaseRelease 16
- SIM switch (dual)2 SIM cards, auto-switch on weak signal, data limit, SMS limit, roaming, no network, network denied, data fail, idle protection
- SIM switch (dual + eSIM)2 SIM cards and 1 eSIM, auto-switch on weak signal, data limit, SMS limit, roaming, no network, network denied, data fail, idle protection
- Status parametersRSSI, SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN
- SMSSMS status, configuration, Email to SMS, SMS to Email, SMS to HTTP, scheduled, autoreply, SMPP
- USSD supportSend/read USSD messages
- Block/Allow listOperator block/allow by country or specific operator
- Multiple PDNUse different PDNs for network access and services
- Band managementBand lock, used band status display
- SIM idle protectionAuto switch to unused SIM periodically to prevent block
- SIM PIN code managementSet, change, or disable SIM card PIN
- APNAuto APN
- Bridge modeDirect bridge from mobile ISP to LAN device
- Passthrough modeAssign mobile WAN IP to LAN device
- Framed routingSupports IP network behind 5G UE
- Wireless mode802.11b/g/n/ac/ax (Wi-Fi 6), up to 2402 Mbps (5 GHz), 576 Mbps (2.4 GHz), MU-MIMO
- Wi-Fi securityWPA2-Enterprise, WPA3, PEAP, WPA2-PSK, WPA-EAP, OWE, AES-CCMP, TKIP, client separation, EAP-TLS with PKCS#12, 802.11w PMF
- SSID/ESSIDStealth mode, MAC access control
- WiFi usersUp to 512 simultaneous connections
- Wireless featuresMesh (802.11s), fast roaming (802.11r), BSS transition (802.11v), RRM (802.11k)
- MAC filteringAllowlist, blocklist
- Wi-Fi QR codeScan to connect without entering password
- TravelMateRedirect Wi-Fi hotspot landing page to next connected device
- WAN port1 x 10/100/1000 Mbps, IEEE 802.3/3u/3az, auto MDI/MDIX
- LAN ports4 x 10/100/1000 Mbps, IEEE 802.3/3u/3az, auto MDI/MDIX
- RoutingStatic, BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP, policy-based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, WOL, VXLAN
- VoIP passthroughH.323 and SIP-alg NAT helpers
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP, ICMP
- FirewallPort forwarding, traffic rules, custom rules, TTL customization
- Firewall status pageView all firewall rules, statistics, counters
- Port managementEnable/disable, auto-config, change transmission speed
- Network topologyVisual representation of network connections
- DHCPStatic/dynamic IP, DHCP relay, server config, MAC static leases with wildcards
- QoS / SQMTraffic priority by source, destination, service, protocol, port, WMM, 802.11e
- DDNSSupports over 77 providers, custom config possible
- DNS over HTTPSSecure DNS resolution through DoH proxy
- Network backupWi-Fi WAN, Mobile, VRRP, Wired failover options
- Load balancingBalance traffic across multiple WAN connections
- HotspotCaptive portal, Radius auth, SMS/SSO, landing page, walled garden, user limits, 9 themes, custom themes
- Hotspot 2.0Seamless, secure, automatic connection to trusted Wi-Fi networks
- SSHFSMount remote file systems via SSH
- Traffic ManagementReal-time traffic monitor, signal charts, usage history
- Port MirroringMirror Ethernet traffic for monitoring and analysis
- 802.1x clientPort-based network access control
- AuthenticationPre-shared key, digital certs, X.509, TACACS+, RADIUS, IP/login block, time-based lockouts
- Firewall configurationPre-set via WebUI, custom via CLI, DMZ, NAT, NAT-T, NAT64
- Attack preventionDDOS, port scan, SYN-FIN, X-mas, NULL flag, SSH/HTTP attacks
- VLANPort/tag-based VLAN separation
- Mobile quota controlData limits by time, warning threshold, phone number
- Web filterBlock or allow specified websites
- Access controlSSH, WebUI, CLI, Telnet control
- TPMTPM 2.0 secure module
- Certificate ManagerCreate CA, server, client, SCEP, Let's Encrypt certificates
- OpenVPNMultiple clients & server, 27 encryption types
- OpenVPN encryptionAES, DES, RC2, CAST5, GCM, CBC, CFB, OFB, etc.
- IPsecXFRM, IKEv1/v2, 14 encryption methods incl. AES-GCM
- GREGRE tunnel and GRE over IPsec
- PPTP/L2TPClient/server support, L2TPv3, L2TP over IPsec
- StunnelTLS encryption proxy wrapper
- DMVPNScalable IPsec VPNs with Dual Hub, Phases 2 & 3
- SSTPClient instance supported
- ZeroTierVPN client support
- WireGuardVPN client and server support
- TincVPN with encryption, auth, compression (client/server)
- TailscaleWireGuard-based mesh VPN, simplified connections
- OPC UAClient and Server over TCP
- MQTT GatewaySend/receive MODBUS data via MQTT broker
- MODBUS modesClient, Server
- MODBUS connectionsTCP, USB
- MODBUS registersCustom register read/write to router file system
- MODBUS data typesINT, UINT (8/16/32-bit), float, HEX, ASCII, byte orders
- Data to Server protocolsHTTP(S), MQTT, Azure MQTT
- Data to Server logicExtract/send from multiple protocols, custom LUA scripting
- DNP3 modesStation, Outstation over TCP
- DLMS/COSEMClient mode, TCP and USB supported
- Web APITeltonika Web API (beta), documented endpoints
- WEB UI featuresHTTP(S), status, config, FW update, CLI, logs, diagnostics
- FOTAFirmware updates via server
- SSH supportSSH v1/v2
- SMS commandsEnable/disable mobile, reboot, output control
- Call featuresReboot, output, hangup, Wi-Fi toggle via call
- Email alertsSend alerts for monitored events
- TR-069OpenACS, GenieACS, AVSystem, FreeACS, etc.
- MQTT supportBroker and publisher roles
- SNMP versionsv1, v2, v3 with trap and brute-force protection
- JSON-RPC APIHTTP(S) based configuration API
- RMSTeltonika Remote Management System
- ThingWorxMonitor WAN, IP, operator name/type/signal
- CumulocityMonitor model, firmware, ICCID, signal, allow reboot/FW update
- Azure IoT HubData upload, API call support, device provisioning
- AWS IoT CoreCloud jobs, API access
- Docker supportRun custom containers for apps/services
- CPUMediatek Dual-core, 1.3 GHz ARM Cortex A53
- RAM (variant 1)512MB DDR3
- RAM (variant 2)1GB DDR4
- FLASH storage (variant 1)16MB NOR, 512MB NAND
- FLASH storage (variant 2)16MB NOR, 8GB eMMC
- Firmware updateWEB UI, FOTA, RMS
- Keep settingsUpdate firmware without wiping configuration
- Factory resetRestore factory defaults including IP and PIN
- Operating systemRutOS (OpenWRT-based)
- Supported languagesBash, Lua, C, C++, Busybox shell
- SDK supportSDK with full build environment provided
- GPL customizationBrand firmware with custom UI and colors
- Package managerInstall optional software via GUI
- GNSS systemsGPS, GLONASS, BeiDou, Galileo, QZSS
- Coordinate reportingWebUI, SMS, TAVL, RMS
- NMEA supportNMEA 0183
- NTRIP supportRTCM streaming via NTRIP
- GNSS server compatibilityTAVL, RMS
- GeofencingMultiple configurable zones
- USB specUSB 2.0
- USB featuresSamba share, USB-to-serial, external modem, HDD, printer
- USB formatsFAT, FAT32, exFAT, NTFS (read-only), ext2/3/4
- Digital Input1 x DI (0–6V logic low, 8–50V logic high)
- Digital Output1 x DO, max 50V, 300mA open collector
- I/O eventsEvent trigger to Email, SMS, RMS
- I/O jugglerDefine logic to trigger I/O based actions
- Power connector4-pin industrial DC socket
- Power input range9–50 VDC, surge & reverse polarity protection
- PoE passiveOn LAN1, 9–30 VDC (not 802.3 compliant)
- Power usage (variant 1)Idle < 4.5 W, Max < 13.5 W
- Power usage (variant 2)Idle < 5.6 W, Max < 20.2 W
- Ethernet ports5 x RJ45 10/100/1000 Mbps
- Digital I/O connector1 DI + 1 DO on 4-pin power connector
- LED indicators4 WAN, 3 Mobile Type, 3 Mobile Strength, 8 LAN, Power, 2 Wi-Fi, 2 WAN
- SIM slots2 x Mini SIM (2FF), external holders, eSIM optional
- Antennas4 x SMA (Mobile), 3 x RP-SMA (Wi-Fi), 1 x SMA (GNSS)
- USB ports1 x USB A
- Reset buttonReboot, user reset, factory reset
- Grounding1 x grounding screw
- Casing materialAnodized aluminum housing and panels
- Dimensions130.4 × 42.6 × 103.4 mm
- Weight452 g
- Mounting optionsDIN rail, wall, flat surface (kits required)
- Operating temperature-40 °C to 75 °C
- Operating humidity10% to 90% non-condensing
- Ingress protectionIP30
- Regulatory (variant 1)REACH, RoHS, CE, UKCA, CB
- Regulatory (variant 2)CE/RED, UKCA, CB, RCM, EAC, UCRF, WEEE
- Vehicle certificationsECE R118, ECE R10 (E-mark)
- EMC standardsEN 55032, 55035, 61000-3-2/3-3, 301 489, etc.
- RF complianceEN 300 328, 440, 893, 303 413, 301 908
- Safety standardsEN IEC 62368-1, 62311
Tarnija toote parameetrid
Product code
LTERUTC50
Brand
Teltonika
Supplier's product code
LTERUTC50
Category
Rout
Product ID
U-5127874
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].