Koos ostetud tooted
Kättetoimetamise tähtajad
Kontorist kättesaamine Tasuta
Kui teie tellimus on kogumiseks valmis, teavitame teid sellest SMS-i ja e-posti teel.
Kogus laos
3 tk | Keskladu |
Ei ole saadaval | Tallinna kontor |
Kulleriga koju (1-4 tööpäeva, kui toode on laos olemas)
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 4,50 € |
Kohaletoimetamine DPD pakiautomaatidele (1-4 tööpäeva, kui toode on laos olemas)
3,50 €
Kauba kirjeldus
433MHz RF ⇋ Wi-Fi Hub
Turn your traditional 433MHz RF remote control into smart. Add 433MHz RF sensors to create smart scenes and build your home security system.
Features
Learn up to 64 433MHz codes
Alarm notification and recording
Remote control
Timer schedule
LAN control
As A "Bridge" to Other Protocol Devices
Traditional 433MHz Remote Control Devices, Instantly Become Smart
Note: The receiving supports fixed codes 433 frequency, like EV1527, PT2260, PT2262, PT2264, etc. Not support to learn rolling codes.
A Button for A Scenario
Create a scene you like. Simply press the remote control button to trigger WiFi or ZigBee devices in eWeLink to enter a scene.
Control All Devices Simultaneously
Once the RF BridgeR2 has successfully learned common remotes, you can use the remotes to control lots of devices in a time.
Create Smart Scenes with 433MHz Sensors
Using motion sensor PIR3-RF, opening floor-to-ceiling windows automatically when sensor detects motion.
Using door/window sensor DW2-RF, when the window is opened, the fan is automatically turned off.
Multiple Timer Ways
Let dumb lights, sockets, and other devices with 433MHz RF control in your home learn to RF BridgeR2, multiple timing options at your disposal.
Specified time
Automatically turn off lights at 11:00 pm every weekday.
Countdown
Close the curtain after half an hour.
Loop execution
Turn on and off the heater every 10 minutes to maintain a constant temperature.
Works with More Ecosystems
* The status of the device is not visible on the eWelink APP or other voice platforms, so the voice command is just to trigger a 433MHz signal to reverse the device status but can not make certain to turn on or off.
Technical data
Wi-Fi | IEEE802.11b/g/n/ 2.4GHz |
Input | 5V DC; 1A |
Operating systems | Android / IOS |
RF frequency | 433,92MHz |
Casing material | PC V0 |
Working temperature | -10℃ ~ +40℃ |
Dimension | 62mm x 62mm x 20mm |