Mikrokontroller UNO Rev3 (Arduino UNO-ga ühilduv), mis põhineb ATMega328 JOY-IT
Toote kood: ARD-R3DIP
Tarne LEMONA electronics kontorisse 1-5 tööpäeva
 5 tk | Keskladu |
 Ei ole saadaval | Tallinna kontor |
Tarne kulleriga koju 1-5 tööpäeva
Tarne pakiautomaati 1-4 tööpäeva
Kättetoimetamise tähtajad
Kontorist kättesaamine
Kontorist kättesaamine Tasuta
Tellimusi töödeldakse ja täidetakse tööpäevadel kell 8.30–17.00.
Kui teie tellimus on kogumiseks valmis, teavitame teid sellest SMS-i ja e-posti teel.
Kui teie tellimus on kogumiseks valmis, teavitame teid sellest SMS-i ja e-posti teel.
Kogus laos
| 5 tk | Keskladu |
| Ei ole saadaval | Tallinna kontor |
Kulleriga koju (1-4 tööpäeva, kui toode on laos olemas)
Kulleriga koju (1-4 tööpäeva, kui toode on laos olemas)
Üle 25,00 € (Tellimused kuni 1000 kgs) | Tasuta |
25,00 €-le (Tellimused kuni 1000 kgs) | 4,50 € |
Kohaletoimetamine DPD pakiautomaatidele (1-4 tööpäeva, kui toode on laos olemas)
Kohaletoimetamine DPD pakiautomaatidele (1-4 tööpäeva, kui toode on laos olemas)
Pärast kauba kullerile üleandmist teavitame teid sellest e-posti teel.
3,50 €
Kauba kirjeldus
The R3DIP Board (Arduino UNO-compatible) is the right microcontroller for beginners who want to get into the programming world quickly and easily.
Its ATMega328 microcontroller gives you enough performance to implement your ideas and projects. It measures 68 x 53 mm and has many connectivity options with 14 digital inputs and outputs and 6 analog inputs.
The board has an USB Type B connector, that you can program it quickly and easily using the familiar Arduino IDE programming environment. The Joy-IT R3DIP with the plug-in systems and circuits can be supplied with power both via the USB port and alternatively via its own power connection.
Please note: In order for the Joy-IT R3DIP to be recognized by the Arduino IDE software, the interface driver CH341 must be installed at first.
MODEL Joy-IT board ARD_R3 DIP
MICROCONTROLLER ATmega328
FLASH 32 KB
SRAM 2 KB
EEPROM 1 x
VOLTAGE 5 V, 50 mA
INTERFACES 14x digital I/O Pins, 6x with PWM,1x USB, 1x SPI, 1x I²C, 1xICSP
DIMENSIONS 68 x 53 mm
WEIGHT 52 g
Kasulik informatsioon
Tehnilised andmed
Tarnija toote kirjeldus
The R3DIP Board (Arduino UNO-compatible) is the right microcontroller for beginners who want to get into the programming world quickly and easily.
Its ATMega328 microcontroller gives you enough performance to implement your ideas and projects.
It measures 68 x 53 mm and has many connectivity options with 14 digital inputs and outputs and 6 analog inputs.
The board has an USB Type B connector, that you can program it quickly and easily using the familiar Arduino IDE programming environment.
The Joy-IT R3DIP with the plug-in systems and circuits can be supplied with power both via the USB port and alternatively via its own power connection.
Please note: In order for the Joy-IT R3DIP to be recognized by the Arduino IDE software, the interface driver CH341 must be installed at first.
Its ATMega328 microcontroller gives you enough performance to implement your ideas and projects.
It measures 68 x 53 mm and has many connectivity options with 14 digital inputs and outputs and 6 analog inputs.
The board has an USB Type B connector, that you can program it quickly and easily using the familiar Arduino IDE programming environment.
The Joy-IT R3DIP with the plug-in systems and circuits can be supplied with power both via the USB port and alternatively via its own power connection.
Please note: In order for the Joy-IT R3DIP to be recognized by the Arduino IDE software, the interface driver CH341 must be installed at first.
Technical data:
Model: Joy-IT board ARD_R3DIP
Microcontroller: ATmega328
Flash: 32 KB
SRAM: 2 KB
EEPROM: 1 x
Voltage: 5V, 50mA
Interfaces: 14x digital I/O Pins, 6x with PWM, 1x USB, 1x SPI, 1x I2C, 1xICSP
Kasulik informatsioon
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: [email protected].
