Nutikas veepump 5V DC mikro-USB või 4xAA patareid, 0,3bar., torud Ø1/4", IPX3, Wi-Fi juhitav, Nedis Smart Life

Take optimal care of your plants and always provide them with the right amount of water with the Nedis SmartLife Water Pump. Thanks to the practical watering system you never have to worry about dead or weak plants again, even when you are on vacation. Simply set a schedule via the Nedis SmartLife app and enjoy healthy and green plants.

How does it work?

Place Nedis SmartLife Water Pump near your plants, cut and use the included 10 meter tubes with all its accessories to reach all required plants as well as a water container of choice: bucket, bottle or watering can.
Power the smart water pump through USB and connect it to your Wi-Fi using the Nedis SmartLife app. Now you can manually water your plants remotely or set a repeating schedule: pump water for a duration of anything between 6 seconds to 30 minutes, and repeat this every hour, day, week or anything in between.

When connected you can fully integrate the pump in Nedis SmartLife to use automations to automatically switch it on/off based on any other Nedis SmartLife product or something like the sunset or weather.

For maximum flexibility you can also use 4 AA batteries (not included) to power the pump wherever you need it. To save power it will be offline when battery powered, but the earlier set schedule is stored locally so it will carry on independently without Wi-Fi.

The pump generates a pressure of over 2 Bar making it easily strong enough to pump water up a total height of 3 meters. On average it pumps approximately 500 ml per minute.

Features

• Automatic smart watering system for 10 plants
  
• Set a time schedule quickly and easily in the SmartLife app
  
• Pump water from any available water container (bucket, bottle or watering can)
  
• Strong enough to pump up to 500 ml per minute, up to 3 meters up
  
• Complete set with 10 meters of tubing, filter, connectors and drip emitters
  
• Physical push button to manually pump water (for the set duration or manually stop earlier)
  
• Connects directly to your Wi-Fi for automatic or remote control (when powered through USB)
  
• Option for 100% wireless installation when used standalone (schedule is stored locally)
  
• The app notifies you when the water (from the bucket, watering can or bottle) has run out
  
• Supports voice control by Google Home and Amazon Alexa
  
• Ideal for during holidays

Product specifications

Device power input connection	Micro USB
Power source type	Battery Powered, USB Powered
Required batteries (not included)	4x AA/LR6
Diameter output	1/4" Tube
Diameter input	1/4" Tube
Maximum water pressure	0.3 bar
Maximum water temperature	50 °C
Wireless technology	Wi-Fi
Transmit frequency range	2412 - 2484 MHz
Maximum transmit power	17 dBm
App available for	Android™, IOS
Compatible with	Nedis® SmartLife
Material	Plastic
Colour	Grey
Operating temperature	3 - 50 °C
IP rating	IPX3
Measurement	67mm x 85mm x 74mm
Weight	480 g

Package contents

• Smart irrigation pump
  
• mounting clip
  
• USB cable
  
• inlet filter
  
• 10m 1/4" tubing
  
• 10x drip emitter
  
• 10x T connector
  
• 3x X connector
  
• 3x I connector
  
• 3x end cap

Take optimal care of your plants and always provide them with the right amount of water with the Nedis SmartLife Water Pump. Thanks to the practical watering system you never have to worry about dead or weak plants again, even when you are on vacation. Simply set a schedule via the Nedis SmartLife app and enjoy healthy and green plants. How does it work? Place Nedis SmartLife Water Pump near your plants, cut and use the included 10 meter tubes with all its accessories to reach all required plants as well as a water container of choice: bucket, bottle or watering can. Power the smart water pump through USB and connect it to your Wi-Fi using the Nedis SmartLife app. Now you can manually water your plants remotely or set a repeating schedule: pump water for a duration of anything between 6 seconds to 30 minutes, and repeat this every hour, day, week or anything in between. When connected you can fully integrate the pump in Nedis SmartLife to use automations to automatically switch it on/off based on any other Nedis SmartLife product or something like the sunset or weather. For maximum flexibility you can also use 4 AA batteries (not included) to power the pump wherever you need it. To save power it will be offline when battery powered, but the earlier set schedule is stored locally so it will carry on independently without Wi-Fi. The pump generates a pressure of over 2 Bar making it easily strong enough to pump water up a total height of 3 meters. On average it pumps approximately 500 ml per minute.